?>

Amplifiers

Model Shown:

SYS1000

L Band Amplifier
Click Image to Enlarge

L/S BAND 2.25kW CW

RF Characteristics
  • Frequency Range: See Options Below
  • Solid State LDMOS and GaN Air cooled; efficiency 40% Typical
  • Operation Modes: AM / FM / Pulse / Linear / ALC
  • RF Output Power: 2.25kW & 4kW CW Minimum at P1dB / GaN-P3dB compression
  • RF Output Level Adjust: 20dB in 0.1dB steps
  • RF Input Power: 0dBm nominal
  • Input/Output VSWR 1.5:1 maximum (Ref 50 Ohm)
  • Output Protection: No oscillation, no damage into infinite VSWR, at any Phase Angle (Internally Protected)
  • Noise Figure: 10 dB Typical
  • Spurious Outputs: 65dBc Minimum
Frequency Range Options
  • 1625 - 1675 MHz
  • 1750 - 1850 MHz
  • 2025 - 2120 MHz
  • 1750 - 2120 MHz NEW! GaN based
  • call for other options
Controls & Reporting
  • Local control via color LCD touch screen
  • Remote Interface: Serial RS-232, RS-422, RS-485 AND Ethernet UDP/IP
  • Control Signals: Output Power Adjust, Operation mode, Units (dBm / Watts), Standby/Online, VSWR Fault Threshold, IP Adress (Comm port or LCD), Com port parameters (LCD)
  • Reported Signals: Forward and Reflected Power and Diagnostic data
Power Supply Characteristics
  • AC Input Power: 170-264 VAC Three Phase, 47-63 Hz
  • SYS1054 2.25kW L Band
  • SYS1059 4kW L/S Band
Specification Sheet Downloads