1030/1090 MHz 1.2 kW Dual IFF Pulsed Power Amplifier

Model: PA1105

Sum and SLS channels with T/R switches · Mode S and Mode 5 · +12 VDC

ISO 9001:2015
IPC-A-610 Class 3
ITAR Registered

The PA1105 is a dual 1,200 W pulsed power amplifier for IFF interrogation at 1030 MHz, with a built-in T/R switch on each channel. Its two independent channels, Sum and SLS, each have their own isolator, T/R switch, output filter and output coupler, and it supports all IFF modes, including long Mode S and Mode 5.

Built-in monitoring checks the input, output and reflected RF pulses on a pulse-by-pulse basis. Gain levels automatically, and the amplifier protects itself against excessive duty cycle and pulse width. The 1090 MHz receive ports are limiter protected, and the unit runs from a single +12 VDC supply with forced-air cooling.

For more output, the PA1123 delivers 2,800 W per channel. The PA1138 is a low-power version, and the PA1033 is a single-channel 3,200 W or 4,000 W amplifier.

Features

Two independent channels, Sum and SLS, each with its own T/R switch
1,200 W minimum per channel at 1.65% duty cycle
Supports all IFF modes, including long Mode S and Mode 5
Pulse-by-pulse monitoring of input, output and reflected RF
Automatic gain leveling, with Sum/SLS gain tracking within ±0.25 dB
Duty cycle and pulse width protection, with output isolators
Over-voltage and over-current protected power supplies
Limiter-protected 1090 MHz receive ports
Single +12 VDC supply, forced-air cooled

Specifications

Frequency Range: 1030 ± 8 MHz transmit; 1090 ± 8 MHz receive
Channels: Two, Sum and SLS, each with a T/R switch
Operation Mode: Class AB; supports all IFF modes, including long Mode S and Mode 5
RF Output Power: +60.8 dBm (1,200 W) minimum at 1.65% duty cycle
RF Output Power Range: +40.8 to +60.8 dBm minimum at P1dB
Gain: 55.8 ± 0.5 dB
Gain Leveling: Automatic, settling within 1 s maximum
Sum/SLS Gain Tracking: ±0.25 dB maximum
RF Input VSWR: 1.5:1 maximum
RF Input Modulation: RF pulse, arbitrary phase modulation 15 MHz at 3 dB maximum; AM 30 dB maximum
Pulse Width: 32 µs maximum
Duty Cycle, Long-Term Average: Sum 1.65%, SLS 0.07% minimum; Mode S: Sum 2.1%, SLS 0.09% minimum
Duty Cycle, Short-Term: Sum 4.4%, SLS 0.2% over 72 ms; Mode S: Sum 7.14%, SLS 0.32% minimum over 5 ms
RF Output VSWR: 1.5:1 maximum (ref 50 Ω)
Output Protection: Operates into 10:1 VSWR without damage; output isolator
Impedance: 50 Ω nominal, input and output
Harmonics: 2nd -30 dBc, 3rd -50 dBc, 4th -65 dBc, 5th -70 dBc, 6th -75 dBc, 7th -80 dBc, 8th–12th -90 dBc maximum
T/R Switch: Hot-switch capable
Receiver Port Protection: 1090 MHz limiter, protected to +10 dBm maximum
Fault Indications: Thermal, mod gate, duty cycle, VSWR, gain, RF input power low, RF output power high, DC input voltage below threshold
Cooling: Forced air
Input Power: +12 VDC at 12 A maximum
Operating Temperature Range: -40 to +55 °C
Storage Temperature Range: -55 to +71 °C
Relative Humidity: 10% to 90% operating, 5% to 95% storage (non-condensing)
Altitude: Sea level to 15,000 ft
Weight: 12.7 lb
Connectors: SMA female RF ports; high-density D-sub power and control/status
Finish: MIL-DTL-53039 paint, FED-STD-595 color 383 green
Workmanship: IPC-A-610 Class 3

Resources

Dual IFF 1,200 W Amplifier Brochure

Custom Configurations

The 1030/1090 MHz 1.2 kW Dual IFF Pulsed Power Amplifier can be configured to your program’s requirements. Tell us the application’s needs and an engineer will follow up directly.

Discuss Your Requirements →